Volkswagen Passat 1995 Official Factory Repair Manual page 1769

VAG 1551 Scan Tool (ST), connecting and selecting 'Engine Electronics' address word 01
Rapid data transfer
DTC Memory is erased
Rapid data transfer
Select function XX
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07....
HELP
Indicated on display
- Press
button.
Indicated on display
- Allow the engine to idle for at least 1 minute
and check DTC memory again.
If no malfunction is displayed:
- Press buttons -0- and -6- to select "End Output"
function 06 and press -Q- button to confirm
input.
- Road test the vehicle for at least 10 minutes.
Road test procedure
Engine coolant temperature must reach at
least 80 C (176 F)
- Briefly depress accelerator pedal to wide open
throttle when engine speed is above 4600
RPM.
- Check DTC memory again, no malfunctions
should be shown.
- Create readiness code
Note:
If the same malfunction is stored in DTC memory
after the test drive, check control module coding
Page 01-10 .
Page 24 of 77
01-30
Page 01-33 .
12/6/2004