Volkswagen Passat 1995 Official Factory Repair Manual page 1471

Selector lever mechanism, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Locking cable (vehicles with ignition key
removal lock), removing and installing
Removing
Note:
Locking cable must not be kinked.
Locking cable must be adjusted after installing
Page 37-35 .
Installation position of locking cable
- Remove selector lever handle.
- Remove cover with cover strip.
- Remove center console.
- Loosen bolt -a- for bracket, remove locking
cable from locking lever and pull off from
bracket.
- Remove steering wheel and ignition/starter
switch trim panels.
- Press locking cable clip out of ignition/starter
switch bracket and remove locking cable from
ball head.
- Remove locking cable.
Page 40 of 47
37-31
6/12/2004