Components of engine, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Resistance values of fuel injectors,
checking
- Test resistance of fuel injectors
between terminals.
Specified value: 14.0 to 20.0
Note:
Resistance value is valid at approx. 20
C. At higher temperatures, resistance
value increases.
If specified value is not obtained:
- Replace malfunctioning fuel injector
Page 24-17
, item 5 .
Note the following when installing the
fuel injectors:
Replace O-rings on all fuel injectors
and wet them slightly with clean
motor oil.
Insert fuel injectors into fuel
distributor perpendicular and in the
right position, and secure them with
retaining clips.
Position fuel distributor on lower part
of intake manifold using secured
fuel injectors and apply uniform
pressure to press it in.
The connectors must audibly
engage on valves when attached.
Page 43 of 62
24-67
6/12/2004