Volkswagen Passat 1995 Official Factory Repair Manual page 2170

Exhaust system components, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.26.1
Page 8 of 10
10 - Separating point
For repairs
When replacing rear
muffler, item 5
Marked by three
depressions around
the circumference of
the connecting pipe
At factory, center and
rear mufflers are
installed as a single
component.
Replacement center
and rear mufflers are
supplied separately,
with replacement
connecting pipe and
two clamps for
connecting joint.
Using V.A.G 1523
body repair saw, cut at
right angle through
connecting pipe at
separation point.
11 - Dimension -b- =
approx. 5 mm
12 - Marking
Three times on length
26-8
12/6/2004