Volkswagen Passat 1995 Official Factory Repair Manual page 1303

Components of engine, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
If indication remains at approx. 141.0 C:
- End diagnosis and switch ignition off.
- Check wires according to wiring diagram
Page 24-50 .
Checking wiring
- Connect test box to control module wiring
harness Page ST-11
wiring test.
- Check wires between test box and 4-pin
connector to Engine Control Module (ECM) for
open circuit according to wiring diagram.
Terminal 1 + socket14
Terminal 3 + socket33
Wire resistance: max. 1.5
- Also check wires for short circuit to each other,
to vehicle Ground (GND) and to B+.
Specified value:
Page 26 of 62
24-50
, connect test box for
6/12/2004