Volkswagen Passat 1995 Official Factory Repair Manual page 2050

EVAP canister system
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.20.2
Checking wiring
- Connect test box to control module wiring
harness Page ST-10
wiring test.
- Check wires between test box and 3-pin connector
for open circuits according to wiring diagram.
Terminal 1 + socket 46
Terminal 2 + socket 35
Wire resistance: max. 1.5
- Check wires for short circuit to each other, to
vehicle Ground (GND) and to B+.
Specified value:
- Check wire between 3-pin connector terminal 3
and relay carrier for open circuit according to
wiring diagram:
Electrical Wiring Diagrams, Troubleshooting &
Component Locations
Page 21 of 22
, connect test box for
12/6/2004
20-48