Volkswagen Passat 1995 Official Factory Repair Manual page 2100

Engine components,checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.24.2
- Check wires between test box and 8-pin connector
to Engine Control Module (ECM) for open circuit
according to wiring diagram.
Terminal 1 + socket 27
Terminal 2 + socket 53
Terminal 3 + socket 10
Terminal 4 + socket 41
Terminal 5 + socket 40
Terminal 7 + socket 33
Terminal 8 + socket 62
Wire resistance: max. 1.5
- Check wires for short circuit to each other, to
vehicle Ground (GND) and to B+.
Specified value:
If no malfunctions are found in wires:
- Check voltage supply of Engine Control Module
(ECM) Page 24-97
- Erase DTC memory of Engine Control Module
(ECM) Page ST-25
Reset/erase diagnostic data.
- Generate readiness code
Page 19 of 59
.
, Diagnostic mode 4:
Page ST-50 .
24-45
12/6/2004