Volkswagen Passat 1995 Official Factory Repair Manual page 1293

Components of engine, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Checking resistance
- Measure resistance of Throttle
Position (TP) Actuator -V60- between
the terminals 1 + 2.
Specified value: 3.0 to 200.0
room temperature)
- Measure resistance of Closed
Throttle Position (CTP) Switch -F60-
between terminals 3 + engine
Ground (GND) in idle position.
Specified value: Max. 5.0
temperature)
- Slowly open throttle valve up to Wide
Open Throttle (WOT)
Specified value:
If specified values are not obtained:
- Replace Throttle Valve Control
Module -J338- Page 24-15
2 .
- Erase DTC memory of Engine
Control Module (ECM)
26 , Diagnostic mode 4: Reset/erase
diagnostic data.
- Generate readiness code
ST-52 .
Page 16 of 62
24-40
(at
(at room
.
, item
Page ST-
Page
6/12/2004