Volkswagen Passat 1995 Official Factory Repair Manual page 1612

Check DTC Memory (function 02)
Rapid data transfer
Select function XX
X DTCs recognized!
Rapid data transfer
Select function XX
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Check DTC Memory (function
02)
- Connect Scan Tool VAG 1551 and select
address word 01 "engine electronics", selection
is performed with engine idling.
If the engine will NOT start, perform the following
steps:
- Operate starter for approx. 6 seconds and then
do not switch off the ignition.
- Press the PRINT button on the Scan Tool to
switch on the printer (Warning lamp in button
lights up).
Display will appear as shown:
HELP
- Input 02 to select Function "Check DTC
Memory" and confirm with Q.
The number of DTCs stored or "No DTC
recognized!" will be shown on the display.
Note:
If something different is indicated on the display:
Scan Tool operating instructions
If one or more DTCs are stored, the stored DTCs
will be displayed and printed out in sequence.
The display will then appear as shown:
HELP
If no DTCs are stored:
- Press button.
Page 1 of 2
01-5
Page 01-3
6/12/2004