Motronic Fuel Injection and Ignition system, component layout
Rapid data transfer
Select function XX
Reading measuring value block
Input display group number XX
Read measuring value block 3
1 2 3 4
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Throttle Position sensor, checking
Note:
If the Throttle Position sensor (G69) has been
removed, installed or replaced, the Transmission
Control Module (J217) and the Throttle Position
sensor must be matched to one another
24-34
- Connect VAG 1551 Scan Tool and select
"engine electronics" (address word 01); with
ignition switched on
Ignition).
Display will appear as shown:
HELP
- Select Function 08 "Read measuring value
block" and confirm with Q.
HELP
- Display will appear as shown:
- Input 03 for display group 03 and confirm with Q.
Display will appear as shown:
(1...4 = Display zones)
Note:
If something different is indicated on the display:
Scan Tool operating instructions
.
page 01-3
Page 45 of 59
24-32
Page
(Fuel and
6/12/2004