Volkswagen Passat 1995 Official Factory Repair Manual page 1933

Multiport fuel injection and ignition system
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07.24.1
- Disconnect 2-pin connector from Engine Coolant
Temperature (ECT) sensor -G62-.
- Check wiring between test box and 2-pin
connector for open circuit according to wiring
diagram.
Terminal 1 and test box socket 14
Terminal 2 and test box socket 33
Resistance: max. 1.5 ohms
- Check wire between ECM connector and 2-pin
connector terminal 2 for short circuit to wire
terminal 1 and to vehicle Ground (GND), according
to wiring diagram.
Terminal 2 and test box socket 14
Specification: ohms
Page 94 of 126
W)
W)
12/6/2004
24-92