Volkswagen Passat 1995 Official Factory Repair Manual page 1421

Ignition, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
If no malfunctions are found in the wires and
there was voltage between outer terminals:
- Replace distributor with Camshaft Position
(CMP) Sensor -G40-
and installing distributor.
- Erase DTC memory of Engine Control Module
(ECM) Page ST-26
Reset/erase diagnostic data.
- Generate readiness code
If no malfunctions are found in the wires and
there was no voltage between outer terminals:
- Replace Motronic Engine Control Module (ECM)
-J220- Page 24-105
Page 21 of 31
Page 28-10 , removing
, Diagnostic mode 4:
Page ST-52 .
.
6/12/2004
28-19