Ignition, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Mark on distributor must align with
mark on rotor arm or camshaft
position sensor cover.
- Remove mounting bolt for clamp and
remove distributor.
Installing distributor
Requirement
Crankshaft and camshaft in TDC
position cylinder 1.
Procedure
- Before installing distributor align oil
pump shaft drive tongue parallel to
crankshaft.
Page 14 of 31
28-12
6/12/2004