Volkswagen Passat 1995 Official Factory Repair Manual page 1981

Multiport fuel injection and ignition system
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07.28.1
Camshaft Position (CMP) sensor,
checking
Special tools, testers and auxiliary items
VAG 1598/18 test box
Multimeter (Fluke 83 or equivalent)
Connector test kit VW 1594
Wiring diagram
Test sequence
- Disconnect 3-pin connector from camshaft position
sensor.
- Connect multimeter using test leads from VW 1594
to measure voltage at terminals 1 and 3.
- Switch ignition on.
- Measure voltage between terminals 1 and 3:
Specification: 9-14.5 volts
- Switch ignition off.
Page 16 of 31
28-16
12/6/2004