Volkswagen Passat 1995 Official Factory Repair Manual page 2016

Fuel supply system components, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.20.1
Installing
Installation of the fuel pump is the reverse order
of removal.
Note:
When inserting Fuel Pump (FP) unit into fuel
tank, be sure not to bend sender for fuel gauge.
Only coat seal with fuel when installing Fuel
Pump (FP).
Installed position of flange for Fuel Pump (FP)
unit Page 20-7
Make sure fuel lines are securely fastened.
After installing Fuel Pump (FP) unit, check
whether supply, return and vent lines are still
clipped in at fuel tank.
When the Fuel Pump (FP) unit is installed correctly,
the floater of sender for fuel gauge faces in driving
direction -A- as follows:
Front Wheel Drive (FWD) vehicles
Station wagon = 5 to 10
Sedan = 70 to 75
- Erase DTC memory of Engine Control Module
(ECM) Page ST-25
Reset/erase diagnostic data.
- Generate readiness code
, Fig. 1 .
, Diagnostic mode 4:
Page ST-50
Page 14 of 27
20-14
.
12/6/2004