Volkswagen Passat 1995 Official Factory Repair Manual page 1336

Components of engine, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
- Generate readiness code
If pressure does drop again:
- Check whether line connections, O-rings in fuel
distributor, and fuel injectors are properly
sealed.
- Check pressure gauge for proper seal.
Note:
Before removing pressure gauge, put cleaning
rags back around line connection which is to be
disconnected.
- Erase DTC memory of Engine Control Module
(ECM) Page ST-26
Reset/erase diagnostic data.
- Generate readiness code
Page 59 of 62
Page ST-52 .
, Diagnostic mode 4:
Page ST-52 .
6/12/2004
24-83