Volkswagen Passat 1995 Official Factory Repair Manual page 1494

Electrical components of transmission control, removing and installing, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Checking wiring
- Connect test box to control module wiring
harness Page ST-11
wiring test.
- Disconnect white connector from Transmission
Vehicle Speed Sensor (VSS) -G38-.
- Check wires between test box and 2-pin
connector to Transmission Control Module
(TCM) for open circuit according to wiring
diagram.
Terminal 1+socket 21
Terminal 2+socket 66
Wire resistance: max. 1.5
Page 16 of 27
38-14
, connect test box for
6/12/2004