Engine components,checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.24.2
Insert fuel injectors into fuel distributor
perpendicular and in the right position, and
secure them with retaining clips.
Position fuel distributor on lower part of intake
manifold using secured fuel injectors and apply
uniform pressure to press it in.
The connectors must audibly engage on valves
when attached.
- Erase DTC memory of Engine Control Module
(ECM)
Page ST-25
Reset/erase diagnostic data.
- Generate readiness code
Checking voltage supply
- Disconnect 5-pin connector (arrow) from Ignition
Coil -N152-.
Page 42 of 59
, Diagnostic mode 4:
Page ST-50
.
24-68
12/6/2004