Volkswagen Passat 1995 Official Factory Repair Manual page 1983

Multiport fuel injection and ignition system
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07.28.1
- Additionally, check wires for short to one
another:
Terminal 3 and test box socket 44
Terminal 2 and test box socket 56
Specification: ohms ( )
If no wiring malfunction is detected and voltage
was present between terminals 1 and 3:
- Replace distributor with Camshaft Position
(CMP) sensor -G40-
If no wiring malfunction is detected and no
voltage was present between terminals 1 and 3:
- Replace ECM -J220-
- Read the readiness code
memory has been erased, verify repair via
appropriate display group
Readiness code, creating.
Page 18 of 31
Page 24-6 , item 3 .
Page 24-6 , item 3 .
Page 01-31 . If DTC
Page 01-33 ,
12/6/2004
28-18