Volkswagen Passat 1995 Official Factory Repair Manual page 1470

Selector lever mechanism, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Fig. 3 Adjusting play between
pressure rod and lever
Dimension a 0.3 mm
Function test
1 - Place selector lever to "P" and
supply solenoid with 12 V. Selector
lever must not be engaged in any
driving modes.
- Interrupt solenoid function, all driving
modes must be able to be selected.
- Pressure rod must not hook on lever.
2 - Set selector lever to "N" and check
as for 1.
- Adjust according to play, install
selector lever completely.
Fig. 4 Securing connector for
indicator lighting
Procedure
- Slide retainer with tab (arrow) far
enough until tab engages.
- Place connector wire into retainer
and slide connector into retainer.
Page 39 of 47
37-30
6/12/2004