Volkswagen Passat 1995 Official Factory Repair Manual page 1430

Ignition, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Checking activation
WARNING!
Do not touch ignition coil connecting
parts or adapter cables during the
following test.
- Remove fuse 18 from fuse holder.
- Connect diode test lamp to terminals
2 + 3.
- Operate starter and test ignition
signal from Engine Control Module
(ECM).
LED should flicker.
If LED flickers and voltage supply is
OK:
- Replace Ignition Coil Power Output
Stage -N157- Page 28-3
Page 30 of 31
28-28
, item 5 .
6/12/2004