Volkswagen Passat 1995 Official Factory Repair Manual page 2097

Engine components,checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.24.2
If specified values are not obtained:
- Disconnect 8-pin connector at throttle valve control
module (arrow).
- Check resistance of throttle valve control module
Page 24-42 .
Checking resistance
- Measure resistance of Throttle Position (TP)
Actuator -V60- between the terminals 1 + 2.
Specified value: 3.0 to 200.0
temperature)
- Measure resistance of Closed Throttle Position
(CTP) Switch -F60- between terminals 3 + 7 in idle
position.
Specified value: Max. 10.0
temperature)
- Slowly open throttle valve up to Wide Open
Throttle (WOT)
Specified value:
If specified values are not obtained:
Page 16 of 59
(at room
(at room
.
24-42
12/6/2004