Volkswagen Passat 1995 Official Factory Repair Manual page 1425

Ignition, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Ignition coil, checking
Recommended special tools and equipment
V.A.G1526 Multimeter
V.A.G1594 Connector test kit
Test sequence
- Disconnect 3-pin connector at ignition coil
Page 28-4 , item 8 .
- Disconnect 3-pin interference suppression
connector at ignition coil
Checking resistances
- Measure primary resistance between terminals 1
+ 15.
Specified value: 0.5 to 1.2
- Measure secondary resistance between
terminals 4 + 15.
Specified value: 3.0 to 4.0 k
If specified values are not obtained:
- Remove ignition coil and Ignition Coil Power
Output Stage -N157-
Page 25 of 31
28-23
Page 28-3 , item 2 .
Page 28-3 , item 5 .
6/12/2004