Volkswagen Passat 1995 Official Factory Repair Manual page 1433

Selector lever mechanism, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
If test and measuring equipment is operated
from the passenger seat, the person seated
there could be injured in the event of an accident
involving deployment of the passenger-side
airbag.
Note:
For the electric components to work properly, a
voltage of at least 11.5 V is required.
Transmission Control Module (TCM) is
equipped with On Board Diagnostic (OBD).
It is possible that the control module will
recognize a malfunction and store a DTC during
some tests. Therefore the following work steps
must be performed in the mentioned sequence
after ending all tests and repairs.
- - Check DTC memory
Diagnostic mode 3: Check DTC Memory,
- - Erase DTC memory
Diagnostic mode 4: Reset/erase diagnostic
data
- - For completion, generate readiness code
Page ST-52 .
Page 2 of 47
37-2
Page ST-22 ,
Page ST-26 ,
6/12/2004