Volkswagen Passat 1995 Official Factory Repair Manual page 1309

Components of engine, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Continuation of test if indication is -
46.5 C:
- Disconnect 2-pin connector -1- from
Intake Air Temperature (IAT) Sensor
-G72- (-2-).
- Bridge terminals 1 + 2 of connector
using the respective adapter cables
while observing the indication on
display.
If indication jumps to approx 141.0 C:
- End diagnosis and switch ignition off.
- Replace Intake Air Temperature
(IAT) Sensor -G72-
item 5 .
- Erase DTC memory of Engine
Control Module (ECM)
26 , Diagnostic mode 4: Reset/erase
diagnostic data.
Page 32 of 62
24-56
Page 24-16 ,
Page ST-
6/12/2004