Motronic Fuel Injection and Ignition system, component layout
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
If the LED does not flicker:
- Switch off ignition.
- Reconnect harness connectors to all fuel
injectors.
- Perform electrical check, test steps Fig. 11
through Fig. 16
Ignition). If necessary replace Motronic Engine
Control Module (J220)
Spray pattern and leaks, checking
- Disconnect ignition coil harness connector.
- Remove fuel rail complete with fuel injectors
Page 24-41
.
- Extend supply and return lines using extension
hoses if necessary.
- Place injectors in VAG 1602 fuel analyzer.
- Reconnect harness connector to each fuel
injector.
Page 57 of 59
page 01-42
(Fuel and
Page 24-8
, item 2 .
24-44
6/12/2004