Volkswagen Passat 1995 Official Factory Repair Manual page 2233

Transmission control electrical components, removing and installing, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.38.1
Checking resistance
- Measure resistance of Transmission Fluid
Temperature Sensor -G93- at test box between
sockets 6 + 67:
ATF temperature
approx. 20 C
approx. 60 C
approx. 120 C
If one of the specified values is not obtained:
- Check wires according to wiring diagram
Page 38-20 .
Checking wiring
- Disconnect 12-pin harness connector at
transmission.
- Check wires between test box and 12-pin
connector to Transmission Control Module (TCM)
for open circuit according to wiring diagram.
Terminal 1 + socket 67
Terminal 12 + socket 6
Wire resistance: max. 1.5
Specified value
230.0 to 265.0 K
37.0 to 51.0 K
5.0 to 9.0 K
Page 20 of 26
38-20
12/6/2004