Volkswagen Passat 1995 Official Factory Repair Manual page 1900

Multiport fuel injection and ignition system
Rapid data transfer
Select function XX
Read Measuring Value Block
Input display group number XXX
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07.24.1
HELP
HELP
Engine operation, checking
Note:
Check establishes whether Engine Control
Module (ECM) -J220- recognizes the engine
operating condition.
Special tools, testers and auxiliary items
VAG 1551/1552 scan tool with VAG 1551/3
adapter cable
Test conditions
Engine oil temperature min. 80 C (176 F)
Test sequence
Engine running at idle
- Connect VAG 1551/1552 scan tool and select
"Engine Electronics" address word 01
01-7 .
Indicated on display
- Press buttons -0- and -8- to select "Read
Measuring Value Block" function 08 and press -Q-
button to confirm input.
Indicated on display
- Press buttons -0-, -0- and -5- to input display
group 005 and press -Q- button to confirm input.
Page 61 of 126
24-60
Page
12/6/2004