Volkswagen Passat 1995 Official Factory Repair Manual page 1500

Electrical components of transmission control, removing and installing, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Test sequence
- Connect test box to control module wiring
harness Page ST-11
wiring test.
Checking resistance
- Measure resistance of Transmission Fluid
Temperature Sensor -G93- at test box between
sockets 6 + 67:
ATF temperature
approx. 20 C
approx. 60 C
approx. 120 C
If one of the specified values is not obtained:
- Check wires according to wiring diagram
Page 38-21 .
Page 22 of 27
, connect test box for
Specified value
230.0 to 265.0 K
37.0 to 51.0 K
5.0 to 9.0 K
38-20
6/12/2004