Volkswagen Passat 1995 Official Factory Repair Manual page 2030

EVAP canister system
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.20.2
EVAP canister system
Note:
Hose connections are secured with screw-type
clamps, spring-type clamps or tensioning
clamps.
Always replace tensioning clamps with spring-
type clamps or screw-type clamps.
Fuel hoses at engine must only be secured with
spring-type clamps. The use of clamping collars
or screw clamps is not permitted.
Components marked with * are tested via On
Board Diagnostic (OBD)
Diagnostic mode 3: Check DTC memory.
VAS5024A spring-type clip pliers is
recommended for installing spring clips.
Observe safety precautions
Observe rules for cleanliness
EVAP canister system components, removing
and installing:
Vehicles without Leak Detection Pump (LDP)
Page 20-29 ,
Vehicles with Leak Detection Pump (LDP)
Page 20-32 .
Check fuel tank ventilation (vehicles without Leak
Detection Pump) Page 20-36
Check EVAP canister system for proper seal
(vehicles with Leak Detection Pump)
40 .
Page 1 of 22
20-28
Page ST-21 ,
Page 20-8 .
Page 20-10 .
.
Page 20-
12/6/2004