Volkswagen Passat 1995 Official Factory Repair Manual page 1552

Diagnostic mode, selecting
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Note:
Only if engine does not start:
- Operate starter for approx. 6 seconds. Do not
switch ignition off afterward.
- Under address word 33, select "Diagnostic
mode 7: Check test results of components that
are continuously monitored".
The number of stored malfunctions or "0
malfunctions detected" is displayed.
- End diagnosis and switch ignition off.
- Repair stored malfunctions according to DTC
table:
SAE P0xxx-DTCs
SAE P1xxx-DTCs
SAE P2xxx-DTCs
SAE P3xxx-DTCs
Note:
The DTC table is sorted by SAE code.
Erase DTC memory after repairing malfunction
Page ST-26 , Diagnostic mode 4:
Reset/erase diagnostic data.
Page 32 of 35
ST-45
Page ST-56 ,
Page ST-75 .
Page ST-93 ,
Page ST-95 .
6/12/2004