Volkswagen Passat 1995 Official Factory Repair Manual page 1816

VAG 1551 Scan Tool (ST), connecting and selecting 'Engine Electronics' address word 01
Output Diagnostic Test Mode
EVAP canister purge solenoid valve -N115
Rapid data transfer
Select function XX
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07....
HELP
- Connect VAG 1527B voltage tester using test
leads from VW 1594 to disconnected connector.
LED must light up
If LED lights up (voltage supply OK):
- Replace Secondary Air Injection (AIR) pump
motor -V101-.
If LED does not light up:
- Check Secondary Air Injection (AIR) pump relay
-J299-:
Electrical Wiring Diagrams, Troubleshooting &
Component Locations
- Check wiring to Secondary Air Injection (AIR)
pump motor -V101- according to wiring diagram.
- Press
button.
Indicated on display
Disregard display.
- Press
button.
Indicated on display
- Press buttons -0- and -6- to select "End Output"
function 06 and press -Q- button to confirm
input.
Page 71 of 77
01-77
12/6/2004