Volkswagen Passat 1995 Official Factory Repair Manual page 2253

General information for On Board Diagnostic (OBD)
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.ST.1
Work procedure for Transmission Control
Module (TCM)
Note:
Transmission Control Module (TCM) is installed
under the rear seat bench.
- Disengage connector from control module and
then disconnect.
- Connect test box (V.A.G 1598/18) to control
module wiring harness (arrow -1-) and engage
(arrow -2-).
When harness connector is disconnected from
Transmission Control Module (TCM) or the battery is
disconnected, all adaptation values in the control
module are erased. In this case, the readiness code
must be generated again
Page 12 of 12
Page ST-50 .
12/6/2004
ST-12