Volkswagen Passat 1995 Official Factory Repair Manual page 1750

VAG 1551 Scan Tool (ST), connecting and selecting 'Engine Electronics' address word 01
Code Control Module
Input code number XXXXX
021906259B MOTRONIC M5.9 AT V0 1
Coding 00001
Rapid data transfer
Select function XX
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07....
HELP
(0-32000)
WSC XXXXX
HELP
Indicated on display
- Enter the appropriate code number for this
vehicle and press -Q- button to confirm input.
Coding For following vehicles
00000 Passat VR6 with manual transmission
00001 Passat VR6 with automatic
transmission
The VAG 1551 scan tool display will show the
control module identification, e.g.:
- Press
button.
Indicated on display
- Press buttons -0- and -6- to select "End Output"
function 06 and press -Q- button to confirm
input.
Note:
The code entered and shown on the display will
not be used by the Engine Control Module (ECM)
until the ignition has been switched off once. An
incorrect coding leads to:
Engine running malfunctions
Increased fuel consumption
Increased emissions
Malfunctions stored in Diagnostic Trouble
Code (DTC) memory which are not actually
present
Reduced transmission life
Page 5 of 77
01-11
12/6/2004