Volkswagen Passat 1995 Official Factory Repair Manual page 2237

Transmission control electrical components, removing and installing, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.38.1
Component
Solenoid valve 5 -
N92-
Solenoid Valve 6 -
N93-
Solenoid Valve 7 -
N94-
Note:
Resistance value is valid at approx. 20 C. At
higher temperatures, resistance value increases.
If one of the specified values is not obtained:
- Check wires according to wiring diagram
Page 38-24 .
Checking wiring
- Disconnect 12-pin harness connector at
transmission.
- Check wires between test box and 12-pin
connector to Transmission Control Module (TCM)
for open circuit according to wiring diagram.
Wire resistance: max. 1.5
Page 24 of 26
Bushing Specified value
56 + 67 55.0 to 65.0
22 + 58 4.5 to 6.5
10 + 67 55.0 to 65.0
38-24
12/6/2004