Volkswagen Passat 1995 Official Factory Repair Manual page 1817

VAG 1551 Scan Tool (ST), connecting and selecting 'Engine Electronics' address word 01
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07....
Read Measuring Value Block (function
08)
Note:
To change to another display group proceed as
follows:
Display VAG 1551 scan
group
Higher Press -3-
button
Lower Press -1-
button
Skip Press -C-
button
Test conditions
Control module in "Read Measuring Value
Block" function 08
Vehicle stationary, engine idling
Engine oil temperature min. 80 C (176 F)
Electrical consumers switched off (radiator
coolant fan must not run during the check)
Air conditioner switched off
Page 72 of 77
VAG 1552 scan
tool tool
Press
Press
Press -C- button
01-78
button
button
12/6/2004