Volkswagen Passat 1995 Official Factory Repair Manual page 2061

Motronic fuel injection and ignition system
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.24.1
VAS 5024A spring-type clip pliers is
recommended for installing spring-type clips.
Components marked with * are tested via On
Board Diagnostic (OBD)
Diagnostic mode 3: Check DTC memory.
It is possible that the control module will
recognize a malfunction and store a DTC during
some tests. Therefore the following work steps
must be performed in the mentioned sequence
after ending all tests and repairs.
- - Check DTC memory
Diagnostic mode 3: Check DTC Memory,
- - Erase DTC memory
Diagnostic mode 4: Reset/erase diagnostic
data
- - For completion, generate readiness code
Page ST-50 .
Safety precautions
Rules of cleanliness
Technical data Page 24-26
Page ST-21
Page ST-21
Page ST-25
Page 24-22 .
Page 24-25 .
.
Page 6 of 26
24-6
,
,
,
12/6/2004