Volkswagen Passat 1995 Official Factory Repair Manual page 2054

Accelerator Pedal (AP) cable, adjusting
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.20.3
- Spacer piece -1-,
a = 15 mm, clamp between accelerator pedal -2-
and stop -3- and hold accelerator pedal firmly in
this position.
- Open throttle valve completely by pulling on
accelerator pedal cable sleeve and secure in this
position using positioning clip (arrow).
- Release accelerator pedal.
- Disconnect 2-pin harness connector from Kick
Down Switch -F8- in engine compartment at front
(on cross panel).
Page 3 of 4
20-52
12/6/2004