Volkswagen Passat 1995 Official Factory Repair Manual page 1502

Electrical components of transmission control, removing and installing, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Solenoid valves in valve body, checking
Recommended special tools and equipment
V.A.G1526 multimeter or V.A.G1715
multimeter
V.A.G1594 connector test kit
Wiring diagram
Test requirements
Selector lever must be in -P- position.
Ground (GND) connections to transmission
must be OK.
Ignition switched off.
Test sequence
- Connect test box to control module wiring
harness Page ST-11
wiring test.
Page 24 of 27
, connect test box for
6/12/2004
38-22