Volkswagen Passat 1995 Official Factory Repair Manual page 2232

Transmission control electrical components, removing and installing, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.38.1
Transmission Fluid Temperature
Sensor, checking
Recommended special tools and equipment
V.A.G 1526 multimeter or V.A.G 1715
multimeter
V.A.G 1594 connector test kit
Wiring diagram
Requirements
Selector lever must be in -P- position.
Ground (GND) connections to transmission
must be OK.
Ignition switched off.
Work sequence
- Connect test box to control module wiring
harness Page ST-10
wiring test.
Page 19 of 26
, connect test box for
12/6/2004
38-19