Volkswagen Passat 1995 Official Factory Repair Manual page 1934

Multiport fuel injection and ignition system
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07.24.1
- Additionally, check both wires for short circuit to
battery positive (B+).
Specification: ohms
If no malfunction in wire is detected:
- Perform resistance measurement at ECT sensor
-G62- terminals 1 and 2, resistance values
Page 24-17 , Fig. 1
If the specification is not attained:
- Replace ECT sensor -G62-.
- Read the readiness code
memory has been erased, verify repair via
appropriate display group
Readiness code, creating.
Page 95 of 126
W)
.
Page 01-31 . If DTC
Page 01-33 ,
12/6/2004
24-93