Accelerator Pedal (AP) cable, adjusting
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.20.3
Accelerator Pedal (AP) cable,
adjusting
Vehicles with manual transmission
Requirement
Ignition switched off
Work procedure
- Remove spark plugs with ignition wires
28-3
, Ignition components, removing and
installing
- Remove ignition wire guides -1- and -2-.
- Remove cover over upper section of intake
manifold -3-.
- Press accelerator pedal to Wide Open Throttle
(WOT) position.
- Adjust accelerator pedal cable via swapping of
positioning clip (arrow) at support bracket so that
Wide Open Throttle (WOT) position is reached on
throttle valve lever.
- Release accelerator pedal.
Page 1 of 4
20-50
Page
12/6/2004