Volkswagen Passat 1995 Official Factory Repair Manual page 1420

Ignition, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Checking wiring
- Connect test box to control module wiring
harness Page ST-11
wiring test.
- Check wires between test box and 3-pin
connector to Engine Control Module (ECM) for
open circuit according to wiring diagram.
Terminal 1 + socket 56
Terminal 2 + socket 44
Wire resistance: max. 1.5
- Check wire between 3-pin connector terminal 3
and relay carrier -G1/4- for open circuit
according to wiring diagram.
Wire resistance: max. 1.5
- Check wires for short circuit to each other.
Specified value:
Page 20 of 31
28-18
, connect test box for
6/12/2004