Danfoss VLT AutomationDrive FC 301 Programming Manual page 34

Parameter Descriptions
0-51 Set-up Copy
Option:
[0] No copy
*
[1] Copy to
3 3
set-up 1
[2] Copy to
set-up 2
[3] Copy to
set-up 3
[4] Copy to
set-up 4
[9] Copy to
all
3.1.6 0-6* Password
0-60 Main Menu Password
Range:
100 [-9999 -
*
9999 ]
0-61 Access to Main Menu w/o Password
Option:
[0] Full access
*
[1] LCP: Read
only
[2] LCP: No
access
[3] Bus: Read
only
[4] Bus: No
access
[5] All: Read only Read-only function for parameters on LCP,
[6] All: No access No access from LCP, fieldbus, or FC standard
If [0] Full access is selected, parameter 0-60 Main Menu
Password, parameter 0-65 Personal Menu Password, and
parameter 0-66 Access to Personal Menu w/o Password are
ignored.
32
VLT
Function:
No function.
Copies all parameters in the present
programming set-up (defined in
parameter 0-11 Programming Set-up) to set-up 1.
Copies all parameters in the present
programming set-up (defined in
parameter 0-11 Programming Set-up) to set-up 2.
Copies all parameters in the present
programming set-up (defined in
parameter 0-11 Programming Set-up) to set-up 3.
Copies all parameters in the present
programming set-up (defined in
parameter 0-11 Programming Set-up) to set-up 4.
Copies the parameters in the present set-up to
each of the set-ups 1 to 4.
Function:
Define the password for access to the Main
Menu via the [Main Menu] key. If
parameter 0-61 Access to Main Menu w/o
Password is set to [0] Full access, this
parameter is ignored.
Function:
Disables password defined in
parameter 0-60 Main Menu Password.
Prevent unauthorized editing of Main Menu
parameters.
Prevent unauthorized viewing and editing of
Main Menu parameters.
Read-only functions for parameters on
fieldbus and/or FC standard bus.
No access to parameters is allowed via
fieldbus and/or FC standard bus.
fieldbus, or FC standard bus.
bus is allowed.
Danfoss A/S © 01/2018 All rights reserved.
®
AutomationDrive FC 301/302
NOTICE
A more complex password protection is available for
OEMs upon request.
0-65 Quick Menu Password
Range:
200 [-9999 -
N/A 9999 N/A]
*
0-66 Access to Quick Menu w/o Password
If parameter 0-61 Access to Main Menu w/o Password is set to [0]
Full access, then this parameter is ignored.
Option:
[0] Full access
*
[1] LCP: Read only Prevents unauthorized editing of Quick
[2] LCP: No access
[3] Bus: Read only Read-only functions for Quick Menu
[4] Bus: No access
[5] All: Read only
[6] All: No access
0-67 Bus Password Access
Range:
0 N/A [0 - 9999 N/A] Use this parameter to unlock the
*
0-68 Safety Parameters Password
Range:
300 [0 - 9999] Enter the password for the safety parameters
*
0-69 Password Protection of Safety Parameters
Option:
[0]
*
[1]
Function:
Define the password for access to the Quick
Menu via the [Quick Menu] key. If
parameter 0-66 Access to Quick Menu w/o
Password is set to [0] Full access, this
parameter is ignored.
Function:
Disables the password defined in
parameter 0-65 Quick Menu Password.
Menu parameters.
parameters on fieldbus and/or FC standard
bus.
Read-only function for Quick Menu
parameters on LCP, fieldbus, or frequency
converter standard bus.
Function:
frequency converter via fieldbus or MCT
10 Set-up Software.
Function:
access. If parameter 0-69 Password Protection of
Safety Parameters is set to [0] Disabled, this
parameter is ignored.
Function:
Disabled
Enabled
MG33MO02