Danfoss VLT AutomationDrive FC 301 Programming Manual page 186

Parameter Descriptions
3.15.11 15-9* Parameter Info
15-92 Defined Parameters
Range:
0 [0 - 9999 ] View a list of all defined parameters in the
*
3 3
15-93 Modified Parameters
Range:
0 [0 - 9999 ] View a list of the parameters that have been
*
15-98 Drive Identification
Range:
0 N/A [0 - 0 N/A] This parameter contains data used by the
*
15-99 Parameter Metadata
Range:
0 N/A [0 - 9999 N/A] This parameter contains data used by
*
184
VLT
Function:
frequency converter. The list ends with 0.
Function:
changed from their default setting. The list ends
with 0. Changes may not be visible until up to
30 s after implementation.
Function:
MCT 10 Set-up Software.
Function:
the MCT 10 Set-up Software.
Danfoss A/S © 01/2018 All rights reserved.
®
AutomationDrive FC 301/302
MG33MO02