Danfoss VLT AutomationDrive FC 301 Programming Manual page 147

Parameter Descriptions
13-02 Stop Event
Select the boolean (true or false) input to deactivate smart logic
control.
Option: Function:
[0] False For descriptions of options [0] False–
*
[61] Logic rule 5, see
parameter 13-01 Start Event.
[1] True
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current limit
[7] Out of current range
[8] Below I low
[9] Above I high
[10] Out of speed range
[11] Below speed low
[12] Above speed high
[13] Out of feedb. range
[14] Below feedb. low
[15] Above feedb. high
[16] Thermal warning
[17] Mains out of range
[18] Reversing
[19] Warning
[20] Alarm (trip)
[21] Alarm (trip lock)
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[30] SL Time-out 0
[31] SL Time-out 1
[32] SL Time-out 2
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset Trip
[42] Auto-reset Trip
[43] Ok key [OK] is pressed. Only available on
the graphical LCP.
[44] Reset key [Reset] is pressed. Only available on
the graphical LCP.
MG33MO02
Programming Guide
13-02 Stop Event
Select the boolean (true or false) input to deactivate smart logic
control.
Option:
[45] Left key
[46] Right key
[47] Up key
[48] Down key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL Time-out 3
[71] SL Time-out 4
[72] SL Time-out 5
[73] SL Time-out 6
[74] SL Time-out 7
[75] Start command given
13-03 Reset SLC
Option:
[0] Do not reset
*
SLC
[1] Reset SLC
3.13.2 13-1* Comparators
Comparators are used for comparing continuous variables
(that is output frequency, output current, analog input, and
so on) to fixed preset values.
Par. 13-10
Comparator Operand
Par. 13-12
Comparator Value
Illustration 3.54 Comparators
Danfoss A/S © 01/2018 All rights reserved.
Function:
[◄] is pressed. Only available on the
graphical LCP.
[►] is pressed. Only available on the
graphical LCP.
▲
[ ] is pressed. Only available on the
graphical LCP.
▼
[ ] is pressed. Only available on the
graphical LCP.
Smart logic controller timer 3 is
timed out.
Smart logic controller timer 4 is
timed out.
Smart logic controller timer 5 is
timed out.
Smart logic controller timer 6 is
timed out.
Smart logic controller timer 7 is
timed out.
Function:
Retain programmed settings in parameter
group 13-** Smart Logic.
Reset all parameters in parameter group 13-
** Smart Logic to default settings.
Par. 13-11
Comparator Operator
=
TRUE longer than.
. . .
. . .
3 3
145