Danfoss VLT AutomationDrive FC 301 Programming Manual page 217

Parameter Descriptions
35-44 Term. X48/2 Low Ref./Feedb. Value
Range:
0 ReferenceFeed- [-999999.999 -
backUnit 999999.999
*
ReferenceFeed-
backUnit]
35-45 Term. X48/2 High Ref./Feedb. Value
Range:
100 Reference- [-999999.999 -
FeedbackUnit 999999.999
*
ReferenceFeed-
backUnit]
35-46 Term. X48/2 Filter Time Constant
Range: Function:
0.001 s [0.001 - 10 Enter the filter time constant. This is a
*
s] first-order digital low-pass filter time
constant for suppressing electrical noise
in terminal X48/2. A high time constant
value improves dampening but also
increases the time delay through the
filter.
MG33MO02
Programming Guide
Function:
Enter the reference or
feedback value (in RPM,
Hz, bar, and so on) that
corresponds to the voltage
or current set in
parameter 35-42 Term.
X48/2 Low Current.
Function:
Enter the reference or
feedback value (in RPM,
Hz, bar, and so on) that
corresponds to the voltage
or current set in
parameter 35-43 Term.
X48/2 High Current.
Danfoss A/S © 01/2018 All rights reserved.
3 3
215