Danfoss VLT AutomationDrive FC 301 Programming Manual page 160

Parameter Descriptions
13-43 Logic Rule Operator 2
Array [6]
Option:
3 3
[0] DISABLED
[1] AND
[2] OR
[3] AND NOT
[4] OR NOT
[5] NOT AND
[6] NOT OR
[7] NOT AND
NOT
[8] NOT OR NOT
13-44 Logic Rule Boolean 3
Array [6]
Option:
[0] False
[1] True
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current Limit
[7] Out of current
range
[8] Below I low
[9] Above I high
[10] Out of speed
range
[11] Below speed low
158
®
VLT
Function:
Select the 2 nd logical operator to be used on
the boolean input calculated in:
•
Parameter 13-40 Logic Rule Boolean 1.
•
Parameter 13-41 Logic Rule Operator
1.
•
Parameter 13-42 Logic Rule Boolean 2.
[13-44] signifies the boolean input of
parameter 13-44 Logic Rule Boolean 3.
[13-40/13-42] signifies the boolean input
calculated in:
•
Parameter 13-40 Logic Rule Boolean 1.
•
Parameter 13-41 Logic Rule Operator
1.
•
Parameter 13-42 Logic Rule Boolean 2.
Select this option to ignore
parameter 13-44 Logic Rule Boolean 3.
Function:
Select the 3 rd boolean (true or false)
input for the selected logic rule. See
parameter 13-01 Start Event (options
[0] False–[61] Logic rule 5) and
parameter 13-02 Stop Event (options
[70] SL Time-out 3–[75] Start command
given) for more information.
Danfoss A/S © 01/2018 All rights reserved.
AutomationDrive FC 301/302
13-44 Logic Rule Boolean 3
Array [6]
Option:
[12] Above speed high
[13] Out of feedb.
range
[14] Below feedb. low
[15] Above feedb. high
[16] Thermal warning
[17] Mains out of
range
[18] Reversing
[19] Warning
[20] Alarm (trip)
[21] Alarm (trip lock)
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[30] SL Time-out 0
[31] SL Time-out 1
[32] SL Time-out 2
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset Trip
[42] Auto-reset Trip
[43] Ok key
[44] Reset key
[45] Left key
[46] Right key
[47] Up key
[48] Down key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
Function:
[OK] is pressed. Only available on the
graphical LCP.
[Reset] is pressed. Only available on
the graphical LCP.
[◄] is pressed. Only available on the
graphical LCP.
[►] is pressed. Only available on the
graphical LCP.
▲
[ ] is pressed. Only available on the
graphical LCP.
▼
[ ] is pressed. Only available on the
graphical LCP.
MG33MO02