Danfoss VLT AutomationDrive FC 301 Programming Manual page 180

Parameter Descriptions
15-10 Logging Source
Option:
[1690] Alarm Word
[1692] Warning Word
[1694] Ext. Status Word
3 3
[3470] MCO Alarm Word 1
[3471] MCO Alarm Word 2
15-11 Logging Interval
Array [4]
Range:
Size related
*
15-12 Trigger Event
Select the trigger event. When the trigger event occurs, a
window is applied to freeze the log. The log then retains a
specified percentage of samples before the occurrence of the
trigger event (parameter 15-14 Samples Before Trigger).
Option:
[0]
*
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]
[33]
[34]
[35]
178
Function:
Function:
[ 0.000 - 0.000 ] Enter the interval in ms between
each sampling of the variables to
be logged.
False
True
Running
In range
On reference
Torque limit
Current limit
Out of current range
Below I low
Above I high
Out of speed range
Below speed low
Above speed high
Out of feedb. range
Below feedb. low
Above feedb. high
Thermal warning
Mains out of range
Reversing
Warning
Alarm (trip)
Alarm (trip lock)
Comparator 0
Comparator 1
Comparator 2
Comparator 3
Logic rule 0
Logic rule 1
Logic rule 2
Logic rule 3
Digital input DI18
Digital input DI19
Digital input DI27
Danfoss A/S © 01/2018 All rights reserved.
®
VLT AutomationDrive FC 301/302
15-12 Trigger Event
Select the trigger event. When the trigger event occurs, a
window is applied to freeze the log. The log then retains a
specified percentage of samples before the occurrence of the
trigger event (parameter 15-14 Samples Before Trigger).
Option:
[36]
[37]
[38]
[50]
[51]
[60]
[61]
15-13 Logging Mode
Option:
[0] Log always
*
[1] Log once
on trigger
Function:
15-14 Samples Before Trigger
Range:
50
N/A
*
Digital input DI29
Digital input DI32
Digital input DI33
Comparator 4
Comparator 5
Logic rule 4
Logic rule 5
Function:
Select [0] Log always for continuous logging.
Select [1] Log once on trigger to conditionally
start and stop logging using
parameter 15-12 Trigger Event and
parameter 15-14 Samples Before Trigger.
Function:
[0 - 100 Before a trigger event, enter the percentage
N/A] of all samples which should be retained in
the log. See also parameter 15-12 Trigger Event
and parameter 15-13 Logging Mode.
Function:
MG33MO02