Danfoss VLT AutomationDrive FC 301 Programming Manual page 207

Parameter Descriptions
23-04 Occurrence
Array [10]
Option: Function:
Select which day(s) the timed action
applies to. Specify working/non-working
days in:
•
•
•
[0] All days
*
[1] Working days
[2] Non-working days
[3] Monday
[4] Tuesday
[5] Wednesday
[6] Thursday
[7] Friday
[8] Saturday
[9] Sunday
[10] Day 1 of month
[11] Day 2 of month
[12] Day 3 of month
[13] Day 4 of month
[14] Day 5 of month
[15] Day 6 of month
[16] Day 7 of month
[17] Day 8 of month
[18] Day 9 of month
[19] Day 10 of month
[20] Day 11 of month
[21] Day 12 of month
[22] Day 13 of month
[23] Day 14 of month
[24] Day 15 of month
[25] Day 16 of month
[26] Day 17 of month
[27] Day 18 of month
[28] Day 19 of month
[29] Day 20 of month
[30] Day 21 of month
[31] Day 22 of month
[32] Day 23 of month
[33] Day 24 of month
[34] Day 25 of month
[35] Day 26 of month
[36] Day 27 of month
[37] Day 28 of month
[38] Day 29 of month
[39] Day 30 of month
[40] Day 31 of month
MG33MO02
Programming Guide
Parameter 0-81 Working Days.
Parameter 0-82 Additional
Working Days.
Parameter 0-83 Additional Non-
Working Days.
Danfoss A/S © 01/2018 All rights reserved.
23-08 Timed Actions Mode
Used to enable and disable automatic timed actions.
Option: Function:
[0] Timed Actions Auto Enable timed actions.
*
[1] Timed Actions Disable timed actions, normal
Disabled operation according to control
commands.
[2] Constant On Actions Disable timed actions. Constant On
Actions activated.
[3] Constant Off Actions Disable timed actions. Constant Off
Actions activated.
23-09 Timed Actions Reactivation
Option: Function:
[0] Disabled After an update of time/condition
•
power cycling
•
setting date
•
time
•
change of summertime
•
change of Hand Auto mode
•
change of Constant ON and OFF
set-up change all activated ON actions are
overridden to OFF actions until passing the next
time for an ON action. Any OFF actions remain
unchanged.
[1] Enabled After an update of time/condition On and OFF
*
actions are immediately set to the actual time
programming of ON and OFF actions.
See the example of a reactivation test inIllustration 3.70.
Timed Action
ON: RUN
OFF: STOP
Power
Power
Cycle
Cycle
P23-09:
P23-09:
Disabled
Disabled
Status
RUNNING
STOPPED
Illustration 3.70 Reactivation Test Diagram
P23-09: Power
Disable Cycle
P23-09:
Enabled
Enable
205
3 3